产品详情：
1、优质钢材焊接，闸式刀架、强度高、刚性好、精度高 ；
2、焊后消除内应力,机身整体加工，保证了加工精度；
3、本机床设有前后挡料。后挡料采用变频调速电机驱动，数字显示数值。设计新颖，调节方便可靠。前挡料采用标尺计数。
4、上刀架的行程量可进行无级调节，以提高剪切下料时的行程次数。
5、机器剪切刃口处装有安全防护栅栏，确保操作安全。
6、刃口间隙调节迅速、方便、并有刻度指示。
7、采用先进的液压集成阀块。结构紧凑，减少管路连接，提高了系统的可靠性与易维修性。

技术参数：

QC11Y Series Hydraulic guillotine beam shearing machine
Specification	Shearing thickness (mm)	Shearing width （mm）	Strokes mm-1	Backguage range (mm)	Shearing angler (°)	Workbench height （mm）	Main power （kw）
QC11Y/K -6*2500	6	2500	10-35	20-600	1°30′	800	7.5
QC11Y/K -6*3200	6	3200	8-35	20-600	1°30′	800	7.5
QC11Y/K -6*4000	6	4000	7-35	20-600	1°30′	800	7.5
QC11Y/K -6*5000	6	5000	6-25	20-800	1°30′	900	11
QC11Y/K -6*6000	6	6000	5-25	20-800	1°30′	1000	11
QC11Y/K -8*2500	8	2500	10-35	20-600	1°30′	800	7.5
QC11Y/K -8*3200	8	3200	8-35	20-600	1°30′	900	7.5
QC11Y/K -8*4000	8	4000	7-35	20-600	1°30′	1000	15
QC11Y/K -8*5000	8	5000	6-25	20-800	0.5-2°	1050	15
QC11Y/K -8*6000	8	6000	5-25	20-800	0.5-2°	840	15
QC11Y/K -12*2500	12	2500	10-35	20-800	0.5-2.5°	900	15
QC11Y/K -12*3200	12	3200	6-20	20-800	0.5-2.5°	940	15
QC11Y/K -12*4000	12	4000	6-20	20-800	0.5-2.5°	1000	15
QC11Y/K -12*5000	12	5000	5-15	20-800	0.5-2.5°	1060	30
QC11Y/K -12*6000	12	6000	6-15	20-800	0.5-2.5°	840	18.5
QC11Y/K -16*3200	16	3200	7-30	20-800	2°30′	900	30
QC11Y/K -16*4000	16	4000	6-30	20-800	2°30′	950	30
QC11Y/K -16*5000	16	5000	6-15	20-800	2°30′	1100	30
QC11Y/K -16*6000	16	6000	5-15	20-800	0.5-2.5°	1100	37
QC11Y/K -20*2500	20	2500	9-30	20-1000	0.5-2.5°	900	30
QC11Y/K -20*3200	20	3200	7-30	20-1000	0.5-3°	950	30
QC11Y/K -20*4000	20	4000	6-30	20-1000	0.5-3°	1100	30
QC11Y/K -20*5000	20	5000	5-30	20-1000	0.5-3°	1100	37
QC11Y/K -20*6000	20	6000	5-15	20-1000	3°	1200	45
QC11Y/K -25*2500	25	2500	5-25	20-1000	3°	900	37
QC11Y/K -25*3200	25	3200	4-25	20-1000	0.5-3.5°	950	37
QC11Y/K -25*4000	25	4000	3-20	20-1000	0.5-3.5°	1100	37
QC11Y/K -32*2500	32	2500	4-12	20-1000	0.5-3.5°	1000	55
QC11Y/K -32*3200	32	3200	4-12	20-1000	0.5-3.5°	1100	55
QC11Y/K -40*2500	40	2500	3-10	20-1000	0.5-3.5°	1200	60
QC11Y/K -40*3200	40	3200	3-10	20-1000	0.5-4°	1200	60
Because in the continuous improvement of products, if there is difference between this date and technical data, should comply with the technical agreement parameters on both sides. No further notice!